January 9, 2021
Description
This bushing will let you remove the raised headboard on an IKEA Leirvik bed frame and still use the decorative knobs on a simpler frame.
This bushing will let you remove the raised headboard on an IKEA Leirvik bed frame and still use the decorative knobs on a simpler frame.
Resolution:
0.3mm layers
</div>Infill:solid
Notes:
Print two. I used Atomic Filament brand PLA but ABS or PETG would work great too.
Approx 7 grams each.
Print with the hole opening on the bed of the printer.
Scale slightly if needed for a tight fit, different printers and settings can change part dimensions slightly.
Assembly
Tap with an M6 tap or screw directly into the hole. It may help to clean-up the hole with a drill bit if needed. Push the part into the open post, screw the set screw in and screw the knob on.
Hope you find it useful.
Kudos to @MarcusBremicker for his similar application part here.
License:
Creative Commons — Attribution
MatthewGTaylor
