June 20, 2023
Description
Simple print to fill in the bottom advertisement buttons! I always push them grabbing the remote and finally pissed me off enough to create this. If someone prints this with glow in the dark filament, please post pics!
Steps:
1 - Remove battery cover and batteries
2 - Remove the 4 screws
3 - Pry the top plate from the main body (I used my printer scrapper tool)
4 - Cut off the lower buttons from the flexible pad
5 - Install the printed filler using a side to side motion (will be a tight fit)
6 - Reassemble
Note - Don't over tighten the small screws
License:
Creative Commons — Attribution — Noncommercial — Share Alike
ScooterMAC
