Manufacturing procedure:
- Material: PETG
- 3D Printer: FDM 3D printer, average print time 2 – 10 hours, depending on size
- Slicer settings: 7 perimeters, 0.3mm layer height, print vertically, use brim
- Post processing instructions: Clean the stringing, remove the brim
- Assembly instructions: Do not use PVC glue, use epoxy or cyanoacrylate, use insulation tape to prevent leaking
Parameters for customization:
- Following parameters can be adjusted using Autodesk Fusion 360
- InnerDiameter1 – Enter value of internal diameter of the first side – default 80mm
- InnerDiameter2 – Enter value of internal diameter of the second side – default 100mm
- ConnectorHeight – Height each part where the PVC pipe enters the coupling - default 50mm
- MidPartHeight – Distance of each connector part of the coupling (the part in the middle). - default 40mm
License:
Creative Commons — Attribution — Share Alike
Médecins Sans Frontières
