3.2 TFT Screen Case (Weather Station)

SD card holder and all PCB connectors pins have to be desoldered from screen.

Also I'm using USB type C instead of micro USB connector which is on Wemos board.

You can print Stand.stl if you want to have it on the desk. Or you can print Wall_mount.stl if you want to have it on the wall. Use stickers to mount that part to wall.

Dimensions without stand: 95 x 60.2 x 13.8mm

Parts:

• 3.2 TFT Screen
• Wemos D1 mini
• Female USB type C board module
• Male micro USB
• Wires
• 4x M3x5mm screws

Print Settings

Printer Brand:

TEVO

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2

Infill:

Notes:

PCB_cover.stl should be printed with 0.1mm layer height

Category: Electronics