Truggy Shell (for Truggy by Niko)

This shell fits on Truggy created by Niko.

You will need:

• 8x Neodymium Magnet 5x3mm
• Glue - for windows (protection net) and shell holders

Glue windows in the place and glue shell holders on stabilizer and upperrear part. Then you can glue or just place magnets in holes.

Print Settings

Printer Brand:

TEVO

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2

Infill:

Notes:

Print it as it is. You can use supports if you have problem to print it without them (use Support Overhang Angle = 60°).

Category: R/C Vehicles