November 14, 2023
Description
I went ahead and made this for on my wall, you can remove and replace parts for other things like watches or jewelery. This is the base where i will be designing wall mounted things off of.
Depending on the load you plan to hang off of it i recommend using double sided tape.
If you want to hang more weight, you could drill/extrude some holes in it. or use self tapping screws.
If it does not fit right away i reccomend printing it 1 or 2 percent bigger/smaller, and slicing the top off so you don't waste that much material.
License:
Creative Commons — Attribution — Share Alike
8
Joris Mooij
