Meanwell LRS-350 mounter for SOVOL SV06

Feb 10, 2024 : STEP file added.

--

Print details:

• Material: PLA, PETG, ABS, or any filament you like. I use Overture PETG Black.
• layer height: 0.20mm
• Supports: You only need support for the big hole. I recommend to use Paint-on supports.
• Infill: 15%

[English]

I made a mounter to replace the Meanwell LRS-350-24 taken from the old 3D printer (QIDI-TECH X-SMART) that is no longer used to SOVOL SV06. All screws can be reused the same as the standard power supply (Meanwell power supply is thinner, so there is one left). The wiring position is also the same as the standard power supply.

The cooling fan of the standard power supply of SV06 is always spinning, but the Meanwell LRS-350 only rotates when the load is applied, so it is very quiet when idle. It makes a certain sound during the printing, but I still feel that it is much quieter than the standard power supply.

[Japanese]

使わなくなった古い3Dプリンター（QIDI-TECH X-SMART）から取り出したMeanwell LRS-350-24をSOVOL SV06に移設するため、マウンターを作りました。ネジは全て標準の電源と同じものを再利用できます（Meanwell電源の方が薄いので1つ余ります）。配線位置も標準の電源と同じです。

SV06の標準電源は常にファンが全開で回っていましたが、Meanwell LRS-350は負荷がかかった時のみファンが動作しますのでアイドル時はとても静かです。プリント中はそれなりの音がしますが、それでも標準電源よりはかなり静かだと感じます。