June 23, 2023
Description
Models for the upper and lower Frequency selector Knobs on the Airbus A320 RMP.
Knobs are both in two parts to allow printing with top face upwards to achieve best visible finish. Printed in matte grey PLA, 100% infill. Knobs are a push fit into collar and shaft of dual concentric encoder, but threaded hole is included for M2 4mm grub screw if required.
Two parts of each knob are a tight push fit, but can be glued with CA adhesive.
Designed to fit the following encoder from Ali Express:
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
![Mark Ayton [MANTOGA] avatar](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/auth/avatars/c2/c285b5fa-c8f4-4c78-acd5-f9dc6a443f70.jpg&w=256&h=256&output=webp&q=100&n=40 "Mark Ayton [MANTOGA] avatar")
Mark Ayton [MANTOGA]
