Mic Boom Arm Stand Cable Organizer Clips

My mic cable has a 4 mm diameter, but it should be fine if yours is a bit different.
 

Any standard material should work fine, you might be able to increase strength a little with one perimeter and 100% infill. If the print is all walls they can separate a little when you bend the part.

Warm up the tops and bend them inwards a bit if they're not holding tight enough

I've also made table protectors for the clamp: https://www.printables.com/model/512099-mic-stand-desk-protectors

CAD: https://cad.onshape.com/documents/80e33127ac0c256261a89059/w/6b4579f62533f84fcfaa086d/e/80f84f93fb177453dd0d52d9

I'm happy to make small modifications. If you liked this model post a make it would make my day!