Microphone Flag Hexagon Print with No Supports

Using the Microphone Flag allows you to place your logo on the mic. This is an easy to print mic flag with 6 sides (Hexagon), to clearly show your logo from all angles.

Print with No Supports.

After printing, place a foam sponge with a path in the middle to grip to the mic, and insert the cover to close it.

 (Note: the cover rests inside the main body, and can move freely when the flag body is empty, it stays in place by the pressure of the foam sponge, unless glued) 

For dense foam, you may want to close the cover first, then insert the foam through the circle opening at the top while aligning inside.

 Now insert the mic.

The circle opening is 35 mm, which fits Shure beta 58a microphone perfectly.  

My Print settings:

• No Supports
• 0.6 mm Nozzle
• 0.15 layer height 

Happy Printing!