June 25, 2023
Description
If you chose to do different filament you may get slightly different color gradients. You can do create this in any printer that has a 225mm bed or larger. If you plan to scale the model make sure that you are only scaling the X and Y, NOT the Z.
Commercial use? I wouldn't sell this one as I just found the image online, and they did not have an artist attributed to it. This is more of a Demo on what can be done.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Pro Blue-Green Transmission Distance: 0.5
PLA PolyLite Jungle Green Transmission Distance: 0.5
PLA PolyLite Green Transmission Distance: 1
PLA PolyLite White Transmission Distance: 7
Swap Instructions:
Black until layer #8 at 0.72mm
Blue-Green until layer #12 at 1.04mm
Jungle Green until layer #23 at 1.92mm
Green until layer #33 at 2.72mm
White for the rest.
Please share your makes!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
WarForgedPrinting
