June 25, 2023
Description
I couldn’t find an AirTag holder to meet my needs, so I designed this.
I drew inspiration from the screw lock carabiner from luvem studios for the mechanism, but created the holder from scratch in Onshape.
https://www.printables.com/model/95972-screw-lock-carabiner
The hinge pin is a tight fit and may need to be adjusted depending on the tolerances of your printer. I made it slightly long so the excess can be trimmed when the pin is pushed home far enough.
works well at layer heights of 0.2mm or finer.
License:
Creative Commons — Attribution — Share Alike
Ov4l8alls
