June 26, 2023
Description
Instructions for Bambu Studio and PrusaSlicer layer swaps.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
This model was created with this Wolverine png.
I used Elegoo Black PLA, Hatchbox Blue PLA, and Hatchbox Yellow PLA.
Swap Instructions:
Set base/first color to BLACK
At layer #12 at 1.04mm, change to BLUE
At layer #18 at 1.52mm, change to YELLOW for the remainder of the print.
License:
Creative Commons — Attribution — Noncommercial
GenerlAce
