Small Picture Frame with hinged rear stay

Small Picture Frame with hinged rear stay

Visible picture area 73mm W x 95mm H (2.88" x 3.73")

Rear stay hinge leg is print in place (hinge will work after printing) then stuck on to back plate.
I used Bostik which makes a strong bond to the PLA

The two small flat tabs to hold the back in are fixed with two tiny screws.
They rotate to allow the back of the frame to be removed.

For the front glass I used 1.5mm clear plastic sheet available from the big online retail store beginning with "A"

All printed in wood effect PLA, no supports required.

I've included Step files as well as STL to make any alterations easier.

If you require a different size the model will scale up or down in CAD or your slicer.

Hope this helps someone.