June 27, 2023
Description
Instructions for Bambu Studio and PrusaSlicer layer swaps.
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.16mm
This model was created with this manga panel image MIRIO.
I used Elegoo Black PLA, Hatchbox Silver PLA, Hatchbox Grey PLA, and Bambu White PLA.
Swap Instructions:
Set base/first color to BLACK
At layer #7 at 0.88mm, change to SILVER (or a Darker Grey)
At layer #14 at 1.72mm, change to GREY (Lighter Gray)
At layer #16 at 1.96mm, change to WHITE for the remainder of the print.
License:
Creative Commons — Attribution — Noncommercial
GenerlAce
