Enclosure for the Rostock Max V2 3D-Printer

This is a documentation to build a DIY enclosure for the 3D printer model Rostock Max V2 (should also work for V3) that is part of the RepRap family of 3d printers and sold by SeeMeCNC and through various resellers. This project uses PLA and ABS prints with the printer itself, laser cut acrylic sheets and a few metric of-the-shelf components only. See here for full documentation and assembly instructions: https://docubricks.com/viewer.jsp?id=6526269302458755072 (https://docubricks.com/search.jsp). Enclosures are typically self-built, because a USA patent seems to be an obstacle for most providers to sell them as standard accessory. Enclosures are desirable to improve the quality of especially ABS prints by increasing the temperature of the print environment and by preventing quick temperature changes e.g. by drafts. ABS print especially benefit from both a lower temperature difference between the heated printer bed and the environment because the material shrinks more than PLA when cooling down, which leads to warping and splitting of prints. Please share if you implement further improvements for this enclosure.

Category: 3D Printer Accessories