June 28, 2023
Description
This is a filament painting of King Kong. It was made by using Midjourney. Printed at 176x220 @ 1.84mm
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PrintBed Black
Printbed White
PrintBed Gray
PrintBed Baja Blue
PrintBed Midnight Blue
PrintBed Cosmic Purple
Swap Instructions:
Black until layer #5 at 0.48mm
Midnight Blue until layer #8 at 0.72mm
Grey until layer #9 at 0.8mm
Cosmic Purple until layer #11 at 0.96mm
Baja Blue until layer #13 at 1.12mm
White for the rest.
License:
Creative Commons — Attribution
miak3D
