February 20, 2022
Description
This is a 3d printed retaining clip for tag connect debug probe.
This is because the clip provided by tag connect is expensive.
Dimensions is based on http://www.tag-connect.com/Materials/TC2030-IDC.pdf
This openscad design used my previous protective cap for tag-connect in https://www.thingiverse.com/thing:3025584 as the base. But without the loop and with tighter tolerance for the alignment clip, so it can friction hold the alignment pin.
This is a work in progress, I will print this out soon to confirm if it works well as a retaining clip.
V1 :- Works well with PETG filament. PLA is a bit too soft.
Unassociated tags: debug probe
This is a 3d printed retaining clip for tag connect debug probe.
This is because the clip provided by tag connect is expensive.
Dimensions is based on http://www.tag-connect.com/Materials/TC2030-IDC.pdf
This openscad design used my previous protective cap for tag-connect in https://www.thingiverse.com/thing:3025584 as the base. But without the loop and with tighter tolerance for the alignment clip, so it can friction hold the alignment pin.
This is a work in progress, I will print this out soon to confirm if it works well as a retaining clip.
V1 :- Works well with PETG filament. PLA is a bit too soft.
License:
Creative Commons — Attribution
8
mofosyne
