June 28, 2023
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.20mm
If you scale along X/Y axes, ensure that Z remains at 100% height or the filament swap instructions will do you no good.
You may, of course, use other brands of filament, but blending may not match my print exactly.
Filaments Used:
Hatchbox PLA - True Black
Bambu PLA Basic - Brown
Bambu PLA Basic - Orange
Bambu PLA Basic - White
Swap Instructions:
Black until layer #5 at 0.52mm
Brown until layer #7 at 0.68mm
Orange until layer #16 at 1.4mm
White for the rest.
License:
Creative Commons — Attribution — Noncommercial
ErickDR 3D Designs
