Proportional Letter, Number, and Symbol Stencils

A full set of letters, numbers, and common symbols in the form of quickly printable stencils, which have been carefully proportioned for easy typographic layout (i.e. each letter's stencil has a unique width/aspect ratio so that they can be simply lined up side-by-side.) 

The STLs I've included here are sized so that the letters end up at a height of 70 mm, with approximately an 8 mm border around all sides - which allowed me to print up to four at a time on my Prusa Mini.  They're designed at a thickness of .6 mm, which creates a three-layered print if you set your slicer at a layer height of .2 mm.  

The designed size creates a nicely usable stencil while consuming relatively little filament (~1.5 grams each), and they print fast.  You can certainly scale them non-uniformly in the X/Y direction for larger/smaller letters, or in the Z direction for a thinner/thicker stencil.

I'm also attaching the Fusion360 file for those that would like to adjust these in other ways as well.  Enjoy!