Parametric Tape Dispenser (Autodesk Fusion)

1. Open the .f3d file in Fusion. Then go to SOLID > MODIFY > Change Parameters > (a table should open)

    2.  Three parameters must be changed. 

• edge_length = tape outer diameter 
• inner_diameter = tape inner diameter  
• body_height = tape thickness

Attention: Adjust only the values marked in yellow here, the values behind them must remain as they are. 

    3. Select the Chamfer tool:  

    3.1 Select all the edges (as highlighted here). 

   3.2 Enter traingle_chamfer as the value.

   4. Export both parts one by one, always turn one off: 

Settings:

layer height: 0.3 mm (or better)

filament: PLA/PETG 

nozzle: 0.4 mm (recommendation)