Duct Tape Fixes Everything Holder

Here's a funny and functional piece of wall art for your shop or utility closet!

Print Settings:

0.2mm layers, 3 walls, 10% infill, 5 bottom layers, 5 top layers, no supports

With 0.2mm layer height - change filament color at 1.6mm height for the text & again after 2.6mm if you only want the text layers to be a separate color from the rest of the body

Hanging:

The holes are 6mm in diameter. Hang the holder with two screws and then cover them with duct tape for added effect!