BYD Atto 3 vent covers

Covers for the air conditioning vents under the front car seats of the BYD Atto 3/Yuan Plus. Allows you to customise the mesh density to your preference to balance air flow vs. preventing debris from entering the vents. A different design can also be bought from sites such as Aliexpress/Taobao.

Print settings:

- Material: does not matter since the area isn't exposed to the sun
- Top layers: 0
- Bottom layers: 0
- Infill: I used 30%, but you can pick how dense you want the mesh to be by changing this
- Infill line width: 180% to thicken/strength the mesh and print faster

For a cleaner top layer finish, you can set the top/bottom layers to 0 specifically for the first 2 mm height (this is the mesh region precisely) with a modifier region in your slicer (Prusa/Superslicer: add modifier -> box -> perimeters/shell modifications)

Items needed:

- Double-sided tape - to stick the covers to the vents

Notes:

- The covers are intentionally designed to be loose to allow for space for double-sided tape
- The covers will actually stay in place (and without rattling) without tape because they'll press against the floor, but the security of tape doesn't hurt