July 3, 2023
Description
This is a wing for Mugen MBX-6, and possibly others. Hole spacing is 41mm center to center.
It wont be as durable as the original, but can be made more durable with post-processing.
Print in PETG at higher temp without fan, or in Nylon.
Optimized for printing with 0.6mm nozzle. 0.2 to 0.4 mm layer height.
Print as orientated in the picture, with the back of the wing flat on the surface, and supports enabled for first 5-10 layers depending on layer height.
Reinforce with automotive protection film, or aluminium tape.
License:
Creative Commons — Attribution — Noncommercial
9
Psimax Aerospace
