July 3, 2023
Description
This ice scoop is optimized for the user not the printer. It requires a screw but prints without support while making no compromises in design or ergonomics. The handle is tilted up slightly to improve the experience of scooping ice out of ice trays.
The design is parameterized so anyone with a working install of Fusion 360 should be able to customize the model. Also a step file is included to import into other software.
Parameters:
Any M3 screw from 8mm to 14mm should be used for securing the handle. I used a low profile socket head but use what you have.
There an alignment dimple to keep the handle from rotating. I printed the test article in PLA and it is working fine, Final version will probably be in ASA, any material is OK.
License:
Creative Commons — Attribution — Noncommercial
mscalora
