Skadis: Prusa MK4 Hex Key + Screwdriver Storage

A model I remixed from @Notrial 's Hex Holder. I wanted the screw driver to also be included as I use the hex keys and screwdriver quite a bit more than the other tools that came with the MK4, thats why I wanted them on my Skadis wall. There is one extra 3mm slot for a hex key. I have a 3mm hex key in there where I cut the shorter side even shorter, to get into the tight spots on the printer. I printed with 3 outer walls, and 25% infill in PLA, supports on build plate with the input shaper firmware for the MK4. Printed with no issues. This model is not a difficult print, so it will likely work with other settings too. I just wanted to give it a bit more strength.