LCR-T4 Case

Case for the LCR-T4 with power switch, parts tray and extra connector for external functionality.

(Note: The extra connector isn't needed but nice to have)

Material needed:

• 3D-printed parts
• 1pcs LCR-T4 (Ex:Will be added)
• 1pcs Switch (Ex: Will be added)
• 1pcs JST-XH 3-pin
• 5pcs M3x6 Self tapping screws (Ex: DIN7981)
• 4pcs M3x10 Self tapping screws (Ex: DIN7981)
• 2pcs M2x8 Self tapping screws (Ex: DIN7981)
• Some wire to extend the power and connect the JST-XH

Print Settings

Rafts:

No

Supports: 

Yes

Resolution:

0.2

Infill: 

20%

Filament: PETG
 

Notes:

No support needed for the top case or JST cap.
Support on build plate for the bottom case and battery lid.

I recommend adding a brim to all parts to help with bed adhesion!

Category: Electronics