V-Slot rail mounted mainboard & Pi zero

After converting my Ender3 v2 to belted Z using Kevinakasam's mod, I installed the psu using his mount and wanted a way to mount the electronics on the other side. 

Created this simple plate that mounts using T-nuts to the rail. The screw holes are meant for M3 screws, but can be easily enlarged for whatever you have on hand.

This makes it much easier to work on the electronics compared to the stock bottom upside down mounting solution that the ender3 v2 comes with.

Has enough room to add some other components as seen in my pics. I have some buck converters and a mosfet board for powering the Pi and controlling the hotend fan.

Printed in ASA and has not problem with 110c bed.