Anti slug house

A small house for protecting slug pellets from rain and birds.

If you have a problem with slugs in the garden and have noticed that the slug pest control pellets quickly dissolve when it rains or just go missing when nobody is around this small shelter might help. 

Inside the house you will find a tray to hold a small amount of pellets.

A optional clip is supplied that can be used to secure the house and roof to the ground in case of strong winds or curious animals.

You will probably need quite a few houses to get good coverage of your garden so the models have been optimized for quick printing with minimal use of filament and no supports.

The house and roof can be printed with 2 perimeters and 0% infill.

The clip can be printed normal settings.

Twelve houses fits on a Prusa MK3 print bed. It's recommended to print the roof as a separate print or it might get a ugly line of different appearance as the print speed changes when the house part is finished.