ESP-EYE Corner Camera Mount

Parts needed for assembly are:

• 5x M3x8mm screws
• 1x M5 screw
• 1x M5 nut

Once printed:

1. Place the ESP-EYE in between the camera mount and cover parts.
2. Attach cover to mount with 3x M3 screws.
3. Interlock the camera mount and printer case mount with 1x M5 screw and nut. 
4. Preview mjpeg/jpg stream from the ESP-EYE on your computer while holding the camera mount at a prospective mounting location against the printer case. Move the mount up and down as needed to get the proper angle and physical clearance when the printhead is at the front-left corner of the case. 
5. Create 3mm mounting holes in your printer frame/case and mount with 2x M3 screws and nuts. 

I loaded a modified mjpeg streamer program from arkhipenko/esp32-mjpeg-multiclient-espcam-drivers on my ESP-EYE and it works great in Octoprint after setting the mjpeg URL in the MultiCam plugin. 

You can turn the camera lenses on the ESP-EYE to adjust the focal length (focus).

This mount references and is compatible with Modular Mounting System by HeyVye!