Bussines Card Box V2

This is a Business card box to easily transport your cards around and dispense them.

Fits 5x8cm cards  for now, i will add more if there is interest and i have time.

Its made to push the cards to the top, so you can always get them out when you need to.

You dont need to add supports.

For Printing:

1. Print the box and the top cover of your choice, I recommend printing this 2 parts in PLA, so it doesnt flex as much with the pressure.
2. Print a pair of springs, i recommend printing the springs in PETG so they last longer under the pressure, but you can print them in PLA as well.

Assembly:

1. Insert the springs in the holders of the box   
2. Get some cards and put the cards in the box.
3. Slightly press the cards down so they don't stick out and hold them so you can slide the top cover into the grooves, then slide it all the way until it locks at the back. You can also feed the cards one by one, its easier but more time consuming

Leave 1 card in when you remove the top so its easier to pull out and the springs dont get stuck on the holes of the cover.

You have permission to modify the blank top part, in case you would like to customize it.

Post your make and tell me what you think, I want to improve this, so feedback is always welcome.

Hope you like it!