August 5, 2023
Description
This is my first try with hueforge.
I have printed this with BambuLab's X1 Carbon scaled down to 60% an it turned out great.
Don‘t have an MMU or AMS?
No problem! Just change the filament manualy. There are only 3 changes for black, grey and white.
Print instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Black until layer #7 at 0.64mm
Gray until layer #12 at 1.04mm
White for the rest.
Happy printing. :-)
License:
Creative Commons — Attribution — Noncommercial
AdRilUtiOn
