Cupholder for BMW E90

This is an old version, head over to my profile for the newer, better one! 


So I was looking for a fitting cupholder for my BMW E90 tray and couldn't find one which wasn't too big.

This one fits to your BMW E90 without the big navi and without the iDrive knob. I made 3 versions which can fit 250ml, 330ml or 500ml cans (Germany/EU). With the big one, the walls might get too thin, read below.

It fits very good to the tray, I use it everyday.

This was designed to be printed with PLA, if you use ABS you might upscale it.

Also, you can print it on the flat surface with my tag without supports.

If you like the design, leave a tip :)

Update 27.06.20

Someone requested a wider hole (currently 57mm) for norwegian 500ml cans.
Uploaded another version with 66mm. Walls get very thin and cut, NO guarantee for good results as I won't try it!

Update 11.07.20

Was shopping a german/EU 330ml can and couldn't fit it. So I made the hole slightly wider (59mm) to fit these. Have fun!

Print instructions

How I Designed This

I modeled this in Fusion360 with a scanned version of the orignial tray.

Some more details on reddit:

Scanned original tray

Modelling the cupholder from the existing tray model