Flexi Dog Leash bag and treat dispenser (ambidextrous)

This is a remix of two great designs that I improved for the pet poo bag and treat dispenser for the Flexi Dog Leash.

Both were great by themselves when I used them, but there were a few issues I had with the original Flexi holder that this is remixed from. The lid was a little delicate and often caught on the leash. It would open the container, and treats go flying (bonus for the dog). Secondly, the bag dispenser was very difficult to load. I improved by combining the really nice treat container with a turning lid into this design to solve that problem. I changed the treat container also to have a baffle inside it to prevent pouring too many treats at once. This does restrict it to smaller Zuke or kibble-like treats, which I find much easier to train a dog with. This is also double-ended, so it can be used in your left or right hand.

The double barrel also acts as a filled bag holder. Just slide it between the two, and you don't need to hold it in your hand, directly.

All the STLs should be aligned to print on the bed, but refer to the photos to see how it should print. 

I recommend something durable like PLA+, PETG, or ABS (which is what I printed mine).

.2mm nozzle
20% infill
Organic/Tree supports on

Print 2 of the treat lids for both ends of the treat container. It's a snap on fit.