Mini Washing machine

A small washing machine that you can assemble yourself, the drum turns and the machine shakes like a real one, as an option you can light up the display and adjust the speed of the drum.  Below you will find the necessary parts as links, if you buy with that links you can also support me a little, without extra costs for you. The assembly is child's play and only requires a little dexterity. Have fun!

A fun gift for young and old and certainly an eye-catcher on every desk. 

What you need to make it work:

1 x (688ZZ) Ball-bearing : https://s.click.aliexpress.com/e/_DeYwlFN

1 x Motor : https://s.click.aliexpress.com/e/_DlR1NNv

1 x Powerswitch : https://s.click.aliexpress.com/e/_DnL3Rax

1x  2Slot Batterieholder :  https://s.click.aliexpress.com/e/_DDAHg4x

1 x Potentiometer : https://s.click.aliexpress.com/e/_DmtLP1t

1 x Rubber with the right strength, like : https://s.click.aliexpress.com/e/_DDvOxlv

A file , the parts can be very tight, supported surfaces, elephant feets,… must be filed off, the parts may not fit otherwise. (like: https://s.click.aliexpress.com/e/_DdVqiaB )

Optional (but recommended): 

1 x LED White : https://s.click.aliexpress.com/e/_DDmBrGn

Some plastic glue (i recommend Revell: https://amzn.to/3DFFAFY )

Tools:

Soldering iron ( like : https://s.click.aliexpress.com/e/_DClaicF )

An hotglue pistol with some hotglue ( like : https://s.click.aliexpress.com/e/_DCyS44j )

A file ,the parts can be very tight, supported surfaces, elephant feets,… must be filed off, the parts may not fit otherwise. (like: https://s.click.aliexpress.com/e/_DdVqiaB )

You can use the same parts for this rotary plate: 
https://www.printables.com/de/model/540051-simple-360deg-rotary-plate-optional-motorized 

No screws needed for assembling :

How to wire the electonics :

How to fix the Mainboard:

To attach the LED for the display illumination. Print out an LED holder and stick it in front of the board in the direction of the display, then fix the LED with a little hot glue.

Make sure you have a good cable guide for the assembly, no cables should touch the belt or the drum, so only use as many cables as can be pulled off the back and placed directly next to it. either use additional LED holders to which you can then fix the cables with hot glue.

If you have any problems with the assembly, don't hesitate to ask.