July 9, 2023
Description
4 Color Hueforge model of a cowboy at sunset.
DO NOT RESCALE
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Elegoo Red Transmission Distance: 7
PLA PolyLite Orange Transmission Distance: 7.5
PLA PolyLite Lemon Yellow Transmission Distance: 6.5
Swap Instructions:
Black until layer #10 at 0.96mm
Red until layer #17 at 1.52mm
Orange until layer #29 at 2.48mm
Lemon Yellow for the rest.
This is a filament blending model, avoid special filaments and stick with the plain ones for the best results.
Use the exact numbers in your slicer to match up properly.
License:
Creative Commons — Attribution — Noncommercial
Jeremy Makes
