July 9, 2023
Description
5 Color Hueforge model of an “Emerald” Dragon.
DO NOT RESCALE
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Matter Hackers “build series” Light Blue Transmission Distance: 14
PLA Matter Hackers “build series” blue Transmission Distance: 6.5
PLA Matter Hackers “build series” Forest Green Transmission Distance: 2.3
PLA Elegoo White Transmission Distance: 10
Swap Instructions:
Black until layer #12 at 1.12mm
Light Blue until layer #14 at 1.28mm
blue until layer #16 at 1.44mm
Forest Green until layer #18 at 1.6mm
White for the rest.
This is a filament blending model, avoid special filaments and stick with the plain ones for the best results.
Use the exact numbers in your slicer to match up properly.
License:
Creative Commons — Attribution — Noncommercial
Jeremy Makes
