Beta FPV 95x Battery Holder

The Beta FPV 95x v3 quad drone doesn't have a very stable battery holder. After a few light crashes in the grass with the battery coming dislodged, I was not too thrilled about the single velcro strip that holds any equipped battery. I designed 2 holders for 2 different batteries that I use (they are listed below). The velcro strap will now hold the batteries in place with the printed box/holder designed to keep it in place.

Please check other images for info/orientation/dimensions. I included files that did not have text on them, if someone wants to play with this and doesn't want to deal with text in the way if splitting/editing the object. Use digital calipers if you want to alter the space for the width, it's around 24-26mm max width for fitting a print mod in there. You can try going smaller with the walls (I did 3mm), and reduce thickness of certain areas. I was trying to avoid the print breaking from being too thin. Good luck!

Print Settings

Printer Brand:

TEVO

Printer: 

Tevo Tornado

Rafts:

No

Supports: 

No

Resolution:

0.2 mm

Infill: 

40%

Filament: Matterhackers MH Build PLA Magenta

Category: R/C Vehicles