July 11, 2023
Description
No supports needed for this guitar pick holder. Refer to images.
I printed at 200c, 1mm retraction with a BIQU H2 hotend. TPU tends to want very little retraction. Speed was about 25mm/s, with 60% speed on the outline. 3 walls, 5 top/bottom layers. You won't need more than 10-25% infill.
If anyone wants a more custom size for the pick holding portion, let me know in the comments. I have the original files from Rhino.
Printer Brand:
TEVO
Printer:
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.25mm
Infill:
10-25%
Filament: Eryone TPU TPU Black
Category: MusicLicense:
Creative Commons — Attribution
8
miremaker
