January 18, 2021
Description
This is a control panel for my MPCNC. It requires pretty specific parts which I have listed below.
Main Panel Connectors
https://www.amazon.com/gp/product/B07HM58GWD/
2 Latching (Enables) and 1 Momentary pushbutton
https://www.adafruit.com/product/481
LCD
https://www.amazon.com/Aokin-Graphic-Display-Controller-Adapter/dp/B07PF297YD/
10k Pot (Spindle Speed Control)
https://www.adafruit.com/product/562
10 pin ribbon cable connector
https://www.amazon.com/gp/product/B00B3PI02G/
Laser Driver (Key switch removed from here and added to panel)
https://jtechphotonics.com/?product=5-amp-adjustable-safety-compliant-laser-diode-driver
Spindle & Driver (Used speed display from driver)
https://www.amazon.com/Daedalus-Brushless-brushless-Switching-Engraving/dp/B083XQ9NF1
Printed at 0.2mm, 20% infill, PLA
License:
Creative Commons — Attribution — Noncommercial
7
Verris
