D20 Elegoo Mars / Pro Cover Knob (or any printer)

I made a D20 knob for my Elegoo Mars Pro table top edition printer. Of course it could be used with any resin printer. The square on top is 70mm square.

Printed it with 4 walls, 25% infill.

The print took right about 4 hrs for .2mm layer height, using a .4mm nozzle, printed in PLA. No supports were used. 45mm/s print speed.

Attach the knob to your case with double sided tape, dual lock 3m velcro, whatever you like. I've even seen people drill 4x holes through the print's corners/base and the top of their case to secure these knobs with M3 locking nuts and screws.

Print Settings

Printer Brand:

TEVO

Printer:

Rafts:

No

Supports:

Resolution:

.2mm

Infill:

Filament: Enomaker PLA Silver

Category: 3D Printer Parts