Retroid Pocket 3+ Griff von SeasonedBeef (Thingiverse)

Das Modell ist von Thingiverse, leider nicht bei Printables zu finden. Es passt aber perfekt an den Retroid Pocket 3+. Gedruckt habe ich meinen Griff in PLA mit einer Skalierung von 99,5% und nichts wackelt. Zur Stabilisierung habe ich es mit 5mm Schürze und organischer Stützstruktur gedruckt.

Folgend die Beschreibung des Modells durch SeasonedBeef von Thingiverse:

Want to support this project? Buy an ABS print directly from me, the designer. I'll even press in the heat set inserts so you don't have to!
www.beefygrip.com

Full sized controller grip for the Retroid Pocket 3 and 3+

Based on a popular actual console controller shape but 100% drawn from the ground up by me.

Absolutely no functionality is blocked by the grip.

Holes on the back for optional M3 x 5mm diameter x 4.0mm length heat set inserts. You can design your own attachments! Hole spacing is 60mm.

Prints best in ABS for an excellent, tight slip-on fit. The grip is just soft and flexible enough in ABS to hold tight for a very good feeling on the handheld, no movement whatsoever between the two.

Prints in the orientation saved - the angled top surface should be flat against the print bed. You might need to make a small rotation adjustment - I'll reupload the STL to fix this soon.

No supports needed. I recommend a little bit of print cooling fan even with ABS material. There is a lot of overhanging and a little bit of bridging involved.

I'll follow up with a PLA fit version at a later date. For now try scaling this ABS optimized model to 99.5% scale and let me know your feedback.