January 20, 2021
Description
Hand mount platform, to hold the Scubapro nova 200 torch
Hand mount platform, to hold the Scubapro nova 200 torch
-Print the hand mount platform. Remember to print the infill solid! You wont have air enclosures.
-Grab a piece of belt, mine was from an old shopping bag, about 20cm/8inch.
-Sew a piece of left- and right-handed Velcro onto the belt.
-Pass one end of the belt through one slot of the platform, flip over and sew together.
-Grab a piece of rugged elastic cord. Thread according to the picture.
-Secure the torch on the platform, using the belt.
-You can fix the platform on your hands back by twisting the elastic cord around the neck of the torch. I salvaged later a cord stopper from a defective rain jacket, this is a much more comfortable solution.
License:
Creative Commons — Attribution — Share Alike
11
bitlischieber
