Leadscrew Filament Guide

To prevent the oily leadscrew of my Tronxy X1 to contaminate the filament, I'm using a bit of PTFE tube to guide it. To prevent the filament from having to make a sharp turn, getting bend a lot or touching the leadscrew, I designed this tube holder.

It clamps the PTFE tube in a straight line towards the extruder and acts as a springy guide for the filament. 

Print Settings

Printer:

Tronxy X1

Rafts: 

Doesn't Matter

Supports:

Yes

Resolution: 

0.2mm

Infill:

20%

Post-Printing

Insert the boden tube by sliding it in from the side. Don't push it in from above, you might break the clamp otherwise!