MWO Timberwolf

MechWarrior Online Timberwolf, roughly 130mm tall.

Fully articulated, and tested, all parts should be 100% printer friendly and error free. Most of the joints are the same as the Articulated MWO Timberwolf by 7Fish (https://www.thingiverse.com/thing:2739971), aside from the ones that I edited (I added ball joints to the upper legs and in the arms, and I edited the ankle joint to allow for ankle tilt).

**If you would like to print one of my optional torso or weapon parts but want to print the rest of the Timberwolf by 7Fish (if you would like to use his prebuilt supports for eg.) you can do so, and everything should fit/work.

***All parts are specifically designed for FDM printing*** 

Notes:

All the parts have been checked for errors and repaired. All the joints and pins have been test printed multiple times, and in varying orientations, and while some orientations are not the best suited for detail preservation, in all cases the pins/joints worked. So you should not have any problems.

Printing Instructions:

MWO_Timberwolf_FootHub (Flip LeftLeg_FootHub in X-axis for right leg) [Print 2]
MWO_Timberwolf_Toes_FrontLeft_Pt1 (Symmetrical) [Print 2]
MWO_Timberwolf_Toes_FrontLeft_Pt2 (Symmetrical) [Print 2]
MWO_Timberwolf_Toes_FrontRight_Pt1 (Symmetrical) [Print 2]
MWO_Timberwolf_Toes_FrontRight_Pt2 (Symmetrical) [Print 2]
MWO_Timberwolf_Toes_Back_Pt1 (Symmetrical) [Print 2]
MWO_Timberwolf_Toes_Back_Pt2 (Symmetrical) [Print 2]
MWO_Timberwolf_Leftleg_Lower (Flip LeftLeg_Lower in X-axis for right leg) (Two options) [Print 2]
MWO_Timberwolf_Leftleg_Top (Flip LeftLeg_Top in X-axis for right leg) [Print 2]

MWO_Timberwolf_Waist [Print 1]

MWO_Timberwolf_TorsoPin [Print 1]

MWO_Timberwolf_Torso_Antena [Print 1]
MWO_Timberwolf_Torso (Ten options) [Print 1]
*Some of the Torso options have weapon attachment slots, where any of the "MWO_Timberwolf_Weapon_"s can be used [Print 1 or 2 depending]

MWO_Timberwolf_LeftArm_UpperPt1 (Flip LeftArm_UpperPt1 in X-axis for right arm) [Print 2]
MWO_Timberwolf_LeftArm_UpperPt2 (Flip LeftArm_UpperPt2 in X-axis for right arm) (Two Types & Two options) [Print 2]
MWO_Timberwolf_LeftArm_Lower (Flip LeftArm_Lower in X-axis for right arm) [Print 2]
MWO_Timberwolf_LeftArm_Elbow_V2 (Flip LeftArm_Elbow in X-axis for right arm) [Print 2]
MWO_Timberwolf_LeftArm_Hand (Flip LeftArm_Hand in X-axis for right arm) (Ten options) [Print 2]
*Some of the Hand options have weapon attachment slots, where any of the "MWO_Timberwolf_Weapon_"s can be used [Print 1 or 2 depending]

If you experience any problems, or would like to ask me something, please leave a comment.