10" Rack Brackets (1 U) for Netgear GS110TP POE Switch

A pair of brackets to mount a Netgear GS110TP POE-switch into a 10"-rack.

As the switch is a little wider than the mountig rails in a 10-inch-rack, the switch is actually mounted behind the rails with a little gap to accomodate the cage nuts. This makes it a bit complicated to install the switch as some room inside the rack is needed to get it in place.

Printing is straight forward with support only on the bed to support the big arches in the front. I would recomment to use a filament like PETG or even ASA as PLA might sag over time.

My switch (GS110TP V2) has four mounting holes in the bottom with an M3-thread. The brackets can be fixed with two 6-mm-M3-screws each.

For mounting inside the rack I would recommend to only fix one bracket to the switch first to be able to slide the other bracket over the switch in order to get the bracket ears in front of the rails and only then fixing the other bracket to the switch.