TPU Vibration Damper - 3030 Extrusion

Damper snaps in to 3030 extrusion for easy installation/removal.

Reference settings for 95A TPU and 0.4mm nozzle

Adjust infill density and/or z-scale (damper length) to fit your needs. The Mk3 and MK4 printers have most of the weight on the back side of the printer so I doubled the length of the dampers in the rear to help support the additional weight.

Print vertically as shown in the images

• Top layers: 0
• Bottom layers: 0
• Walls: 3
• Infill type: Gyroid
• Infill Density: 20%
• Line width: 0.5mm
• Layer height: 0.3mm
• Flow: 1.05