Home Depot Rotten Pumpkins LED Puck Adaptor Insert

This adaptor or insert is meant to be used with Home Depot's Halloween Rotten Pumpkin Patch collection. The adaptor will allow you to swap out the internal components for an addressable led puck light (similar to this). Now you can make your pumpkins even more spooky in your light shows!

The design is meant to allow both the female and male pigtails to slide through easily, including the large hex. This way no splicing is needed on the pigtails. Reference the images to see how the puck is inserted into the adaptor.

There are several different models.
25mmH means that the adaptor has a 25mm height.
50mmH means that the adaptor has a 50mm height.
The year denotes the proper spacing needed for the screw ears to line up into the blow-mold.

See the images for the tested HomeDepot Pumpkins that this design works in.

Print Settings:
.30mm
25% infill
3 Perimeters
Organic Supports
PLA or PETG is fine