Universal Binocular Tripod Mount (for roof prism glasses)
Bike CyclistMarch 5, 2021
Description
Universal Binocular Tripod Mount (for roof prism glasses)
Fully customizable version will follow as soon as I have cleaned up the OpenSCAD source code.
Additionally required:
- 2 pcs 500 mm pieces of shock cord (ca. 5 mm strength)
- 4 pcs cord stops
1 pc 1/4" hex nut
Binoculars will be held on the mount by one loop of the shock cord over each barrel at the oculars and one at the objectives.Thread cord through holes so that the four ends emerge from the four centre holes of the forward bridge. Arrest them with cord stops.
Print instructions
Category: Camera Summary
Universal Binocular Tripod Mount (for roof prism glasses)
Fully customizable version will follow as soon as I have cleaned up the OpenSCAD source code.
Additionally required:
- 2 pcs 500 mm pieces of shock cord (ca. 5 mm strength)
- 4 pcs cord stops
1 pc 1/4" hex nut
Binoculars will be held on the mount by one loop of the shock cord over each barrel at the oculars and one at the objectives.Thread cord through holes so that the four ends emerge from the four centre holes of the forward bridge. Arrest them with cord stops.
