Smart Card Holder

I have to use multiple smart cards at work for my job so I made these. There are two versions…first version I made was over 8 years ago on my Flash Forge Creator X using ABS and the second I made using PLA on my CR6 Max.

First design can be identified two ways; 

1 - There are “thinner” walls and the model was printed in ABS on my FlashForge Creator X (with subsequent Acetone Vapor bath treatment to improve strength)

2 - Later designs have saw tooth slots and were printed in PLA on my CR6 Max/Ender 3S1

These can all be printed on any brand printer, but I recommend the thicker ones be printed on a Carbon X1 since multi-color is so much easier on that one. (Later designs were also printed in PLA.)